CAN ANYONE ANSWER THIS QUESTION?

Get Togethers, Workshops, Open Houses (Any Place, Any Size)
Post Reply
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

CAN ANYONE ANSWER THIS QUESTION?

Post by Ben-Had »

What time does the BCG Open House in Durham NC on Saturday start at?

Thank you.
Tim Benware
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by tippie53 »

show up around 10am we will be there and it will be informal.

Topics to address

Neck setting
set up
finishing

temp for perfect beer
34.8
this will be tested later
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by Ben-Had »

Thanks.

PS - I like mine around 34, my body temp is lower than normal:)
Tim Benware
watergunn
Posts: 277
Joined: Fri Nov 25, 2011 10:20 am
Location: Cumming, GA

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by watergunn »

Will the earlier mentioned points of top bracing and setting the geomotry still be discussed?

Also, I like my Yengling in a bottle not the can.

But I will take the can in an emergency situation!!


Thanks

Rick Gunn
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by tippie53 »

Open house went well. I will post pictures as soon as I get them. I wasn't able to take pics but people did and promised to help out.
Thanks for all that came
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by Ben-Had »

It was a great day and it looks like we'll be starting a "triangle" builders group.
Tim Benware
 

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by   »

Ben-Had wrote:It was a great day and it looks like we'll be starting a "triangle" builders group.
OK, I'll be the first to ask. What's a triangle builders group.
watergunn
Posts: 277
Joined: Fri Nov 25, 2011 10:20 am
Location: Cumming, GA

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by watergunn »

I really enjoyed it and learned a lot from John and the other builders that were there.

Definitely worth the drive from Atlanta.

Rick Gunn
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: CAN ANYONE ANSWER THIS QUESTION?

Post by Ben-Had »

tommyboy wrote:
Ben-Had wrote:It was a great day and it looks like we'll be starting a "triangle" builders group.
OK, I'll be the first to ask. What's a triangle builders group.
The area of NC in the Raleigh/Durham region is referred to as the "Triangle" because of the proximity of the "Triangle Research Park."
Tim Benware
Post Reply