Attendee List - all are welcome

Get Togethers, Workshops, Open Houses (Any Place, Any Size)
petecef
Posts: 19
Joined: Thu Oct 06, 2011 11:43 am
Location: Kenmore, NY
Contact:

Re: Attendee List - all are welcome

Post by petecef »

John Hall has been gracious to offer delivery of any RC Tonewoods orders to the Blues Creek open house this year. Please have your order in by May 27th and pick "in store pickup" at checkout. Then send me a note that you want John to bring it down with him. He will also be selling a few items for us at the Blues Creek open house as well. http://rctonewoods.com/RCT_Store/
watergunn
Posts: 277
Joined: Fri Nov 25, 2011 10:20 am
Location: Cumming, GA

Re: Attendee List - all are welcome

Post by watergunn »

Any idea as to how many will be attending? Also, what all would be talked on?

Looking forward to meeting everyone.

Thanks

Rick Gunn
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: Attendee List - all are welcome

Post by Ben-Had »

Also what are the hours going to be and do we need to bring anything?
Tim Benware
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: Attendee List - all are welcome

Post by Ben-Had »

WHAT TIME DOES IT START?
Tim Benware
Bon 04
Posts: 9
Joined: Wed Sep 12, 2012 11:17 am

Re: open house for blues creek will be on the road this yea

Post by Bon 04 »

tippie53 wrote:
We will have a talk about bracing tops

Also speaking and demo on setting the geometry
What does "setting the geometry" mean?
tippie53
Posts: 7036
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Attendee List - all are welcome

Post by tippie53 »

when you prep a rim , there is an angle we create to allow the fretboard plane off the neck match the body so that the string height at the point of the saddle / bridge area is correct.
If you don't do this right the string height would be too hi or low. Also the fret board would not be true and there would be a dip or worse a rise.

think of it this way , the fret board and neck are what makes the guitar playable , and it is a detail that needs to be addressed. This is what I refer to setting the geometry ,
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply