You must be logged-in to access this page.

Most Recent Comments:

Hoorah! My second Drednaught is finished!
Dana Bourgeois ~ Oil Varnish Finish ?
Baritone guitar 28" Spruce / Cocobolo
Nut string slot repair
This forum
The fix to the guitar top is done!
My First Guitar, thanks to you!
Adirondack & Indian Rosewood Dread
Mixing Shellac
06 is done!
2nd Build. 14 Fret OM EIR Sitka
Guitar Kit Questions
1st Build - all mahogany deep-body 000
Neck Pocket Depth
Stain woes
SASSAFRAS
Final setup question
Bridge height
Second drednaught build ongoing progress!
Stewmac 000 Top Started To Bulge ?
How to notch the kerfing for braces?
Custom Soundhole Sticker
Finally finished #2
Here's what I have been working on lately:
final stages...finally
bending binding by hand
Stock Standard Stewmac 000
Why Don't Guys Add Their Bio ?
Ah... ain't gettin' old fun?
Two Fretboards With Same Issue ?
Wood Strengthener on a soundboard?
Ervin Samogyi video and book
Truss rod filler strip
Sides rippled
closing the box but have a question
Veneer to make a tight appearance of the neck-body-joint
Thoughts on Neck To Body Angle.
Placement of "peaks" in scalloped braces
The Thud of a Dud Note ?
Funky Bridge
Repairing my first build
Stew-Mac 000 Kit Question
Surprise for me
Martin Kit - Quality Control Issues ??
What did it cost you to build YOUR guitar?
First Impressions after opening the box
Major Surgery Next Week: Andy and Melissa
A Mess'n With Colortone ~ And Where It Can Lead
Bridge Fixed
Nuts & Saddles
Safe-T-Planer
Congratulations Bill and sorry for neglecting this forum
Anyone Used Colortone Pore Filler ?
There is Shellac....and then there is Shellac
Pore Filling Techniques Needed
World Economic Crisis Costs Aussies Out Kit Guitar Building
Access to the truss adjustment, brace seems to restrict access to the rod
The Wacky Ways Of Weldon
Where is everyone?????
Homemade Binding Laminator
My Old Router vs the New Trmmer
Who makes the best Kit
Wood choices - opinions requested
Side Bracing Strips ~ Convention or Good Practice ?
Question about Climate
Homemade Brace End Thickness
Can I Do It?
Rift Sawn Brazilian or Quarter Sawn East Indian?
Building an Archtop
X brace intersection with pre-scalloped braces
Bridge pin height ,Saddle won't sit flat
Martin Molds
Homebuilt Gobar Deck Does The Job
A 1/16" Difference?
Shaping the back braces and a ? about gluing on the back!
Neck Stock width at the nut.
Introducing myself
DIY Back Brace Caul Clamping Board
set up and intonation
X-brace joint
help me take the plunge
Dreadnought braces for my 000?
Stew Mac 000 Radius
3 Braced and Voiced tops for sale
Making braces from billets
Fretboard Inlay Alternative
A lesson in humidity and humility
Mahogany ~ LMI vs StewMac


BACK