Dressing up a Grizzly uke kit

General Information about Building Kit Ukuleles
Post Reply
nkwak
Posts: 650
Joined: Sat Nov 13, 2010 9:55 pm
Location: Pittsburgh PA suburbs

Dressing up a Grizzly uke kit

Post by nkwak »

I was thinking of using the uke kit I got for my 3yo as a guinea pig for learning finishing and binding. I have grand visions of also doing some inlay on it. Has anybody else ever done this?

BTW, how the heck do you put a rosette on one of these since the soundhole's already cut out?
~ Neil
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Dressing up a Grizzly uke kit

Post by tippie53 »

the fretboard isn't solid so inlay is very difficult . The veneer is so thin that you will likely sand through it . Binding can be done but you need a fresh bit and again this is veneer so if you don't get the binding perfect you will likely again sand through the side veneers.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Dressing up a Grizzly uke kit

Post by tippie53 »

I admit to making a few of these myself . I was surprised at the sound . It at least sounded like a uke
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
nkwak
Posts: 650
Joined: Sat Nov 13, 2010 9:55 pm
Location: Pittsburgh PA suburbs

Re: Dressing up a Grizzly uke kit

Post by nkwak »

OK, so I bought one and have been taking the jump into French polish today using amber Shellac. I don't know, I must be doing it wrong because I'm actually having fun so far. I think the sapele looks kinda nice now. The finish is starting to fill in and little by little the gloss is starting to get clearer with each coat.
~ Neil
nkwak
Posts: 650
Joined: Sat Nov 13, 2010 9:55 pm
Location: Pittsburgh PA suburbs

Re: Dressing up a Grizzly uke kit

Post by nkwak »

Well, it was going good:

Image

Another casualty of sibling rivalry.

BTW, the 12th fret is MIA. I may just chuck it and start over but I put a LOT of effort into the French polish as was just about to do the final buff.
~ Neil
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: Dressing up a Grizzly uke kit

Post by Darryl Young »

Oh no......that hurts!
Slacker......
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Dressing up a Grizzly uke kit

Post by Kevin Sjostrand »

Gosh Neil, how sad.
If you do another one make sure to lock it up out of reach when not being worked on.

Kevin
nkwak
Posts: 650
Joined: Sat Nov 13, 2010 9:55 pm
Location: Pittsburgh PA suburbs

Re: Dressing up a Grizzly uke kit

Post by nkwak »

FWIW I'm thinking of picking up another one. They're only $22 or so and I've already got the shellac ready to go. The only thing I'm out of really is time put into it - and I skipped pore filling anyway.
~ Neil
rustyjuggler
Posts: 9
Joined: Sat Sep 03, 2011 4:51 pm

Re: Dressing up a Grizzly uke kit

Post by rustyjuggler »

You can probably still make it playable if you drill a few holes in the neck and in the body and use a few plugs to join them together again, but maybe some of the fretboard is broken off?
Post Reply