I use Titebond liquid hide glue on occasion, and I always keep it on hand. I quit using it on bridges though, when I had a couple of glue failures; I use HHG or Titebond I to attach bridges. I prefer HHG construction, but I've not had any issues with Titebond hide glue for general assembly (except bridges). I use it with a little water when I fret. If you use Titebond hide glue, increase your clamping time. I clamp overnight.Morecowbell wrote:I know this is an old thread but came across it looking for fish glue info, so....
John - you mention the Franklin liquid hide glue being reformulated - any experience with the Titebond Liquid Hide Glue product?
I've used lots of Titebond wood glue in model and furniture making - great stuff and easy to use but I can understand why people look for alternatives in instrument building.
Thanks!
Clay
Old Brown Glue
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Old Brown Glue
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: Old Brown Glue
Admittedly a small sample, but I have glued on 2 bridges with Old Brown Glue, the first one in 2016, and they are both holding fine. From what I have read, this brand is a little different than Franklins or Titebond - it is just regular hhg with urea in it, like some ad to hhg to extend its open time a bit.
Ed
Ed
Ed M
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Old Brown Glue
I would recommend old brown glue over the other cold hide glues .
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 284
- Joined: Thu Feb 21, 2019 10:51 am
- Location: Fishers, IN
Re: Old Brown Glue
Thought this was an interesting article on hide glue; "Hide Glue in the Modern Workshop", James Russel. Primarily from a furniture perspective but covers various strengths, how to modify open times, etc.:
https://emgw.org/resources/Documents/Me ... rkshop.pdf
https://emgw.org/resources/Documents/Me ... rkshop.pdf
"Facts seldom sway an opinion." - John Hall
"The difference between theory and practice is that in theory there is no difference." - Van de Snepscheut
"The difference between theory and practice is that in theory there is no difference." - Van de Snepscheut
-
- Posts: 284
- Joined: Thu Feb 21, 2019 10:51 am
- Location: Fishers, IN
Re: Old Brown Glue
There's also a Fine Woodworking article from 2007 that tested 6 types of glue including aliphatic resins, HHG and Old Brown Glue. The results are interesting to say the least. The article is stamped "not for copying or distribution" but is available on the Old Brown Glue website.
"Facts seldom sway an opinion." - John Hall
"The difference between theory and practice is that in theory there is no difference." - Van de Snepscheut
"The difference between theory and practice is that in theory there is no difference." - Van de Snepscheut
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Old Brown Glue
Nice article. Thanks for the link!Morecowbell wrote:Thought this was an interesting article on hide glue; "Hide Glue in the Modern Workshop", James Russel. Primarily from a furniture perspective but covers various strengths, how to modify open times, etc.:
https://emgw.org/resources/Documents/Me ... rkshop.pdf
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Old Brown Glue
The problem with HHG is that it cools down so fast. I've been using a technique which has never failed me. Due to physical limitations, I can't move fast enough to clamp a back/top, or braces, before the HHG cools. I pretty much use HHG, exclusively, on all of my guitars now.
This is how I solved my problem:
I use an old hairdryer that I keep in the shop. Any hairdryer will do, but for your information, it's a 1200 watt dryer. After gluing and clamping a top/back, or putting the gobars on my braces, I put the hairdryer on "high" and "hot", and aim the stream of hot air at the joint that I've just glued. I hold the hairdryer close, about 1-2" from the joint, and I slowly move it along the joint, heating the wood and glue. I keep the dryer moving, but slowly.
I'm sure you could overheat the joint, denaturing the glue, but I've never had this happen. This has worked like a charm for me. I hope it helps someone else.
This is how I solved my problem:
I use an old hairdryer that I keep in the shop. Any hairdryer will do, but for your information, it's a 1200 watt dryer. After gluing and clamping a top/back, or putting the gobars on my braces, I put the hairdryer on "high" and "hot", and aim the stream of hot air at the joint that I've just glued. I hold the hairdryer close, about 1-2" from the joint, and I slowly move it along the joint, heating the wood and glue. I keep the dryer moving, but slowly.
I'm sure you could overheat the joint, denaturing the glue, but I've never had this happen. This has worked like a charm for me. I hope it helps someone else.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Old Brown Glue
a heat lamp also work well
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com