Can anybody tell me the mounting screw spacing for a Bosch Colt router base? I need to make a new follower plate for a Bosch Colt router mounted on a Fleishman-style binding machine owned by a friend of mine. At some point I'll get a chance to look at it and measure for myself, but I'd like to get the dimensions and start thinking about it.
I think the base is something like this. I need the ??? dimensions.
Dimensions ofm Bosch Colt Router base
-
- Posts: 1727
- Joined: Wed Aug 13, 2014 12:14 pm
Dimensions ofm Bosch Colt Router base
You do not have the required permissions to view the files attached to this post.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 7026
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Dimensions ofm Bosch Colt Router base
I used a number of these and there are a few sets of spaced holes. The plate they use is rectangular so many of the attachment holes were at a few different places.
tried finding a picture , none available to show the base
tried finding a picture , none available to show the base
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 52
- Joined: Tue May 09, 2017 5:34 am
Re: Dimensions ofm Bosch Colt Router base
Hi MaineGeezer
I have one and if this is what you are looking for.
It looks like one way is 2 22/32 for the short side and exactly 3 inches the long side.
I have one and if this is what you are looking for.
It looks like one way is 2 22/32 for the short side and exactly 3 inches the long side.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1727
- Joined: Wed Aug 13, 2014 12:14 pm
Re: Dimensions ofm Bosch Colt Router base
Thank you!
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion