Honduran Mahogany/Sitka OM

Take us through building your guitar step by step. Post pictures and tell us what you're doing.
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Honduran Mahogany/Sitka OM

Post by Diane Kauffmds »

This is 1 of 3 guitars I've started. This will be a Christmas present for my husband's nephew.

I'm using a new joining jig that I made out of spare birch plywood. I also made a much better shooting board to replace the old, cobbled together one.

The joining jig works so well, I think I'm going to make a second one so I can join 2 plates at once
PicsArt_07-14-12.01.47.jpg
PicsArt_07-14-12.00.00.jpg
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Honduran Mahogany/Sitka OM

Post by Kevin Sjostrand »

Way to go Diane, nice jig. I bet it makes the process pretty easy for good clamping.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Honduran Mahogany/Sitka OM

Post by tippie53 »

post some pics of your shooting board in fact I think that would be a great topic
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Honduran Mahogany/Sitka OM

Post by Diane Kauffmds »

I've braced the top and back, and installed the rosette. I decided on a different look for the rosette. I brought the mahogany to the soundhole. The rosette is mahogany, BWB, 3mm abalone, bwb.
PicsArt_07-21-04.29.38.jpg
PicsArt_07-21-04.30.00.jpg
PicsArt_07-21-04.28.12.jpg
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Honduran Mahogany/Sitka OM

Post by Diane Kauffmds »

I'm finally finding the time to work on the 3 builds that I started.

I bent the sides on the bending iron. They came out great. The kerfing is in, and I've glued the bottom. I still need to install the struts, but I'll do it tomorrow when the bottom is unclamped.

I bought a bunch of dryer vent rings from Ebay a year ago, with the intention of using a halo clamping system. This is the first time I've tried it. I made crude halos which go around the back and top. I routed an area in which the edges of the vent rings can ride. I was worried about slippage, but my worries were unfounded. The rings bite into the wood halo. They also provide very firm clamping pressure.

As I mentioned in another post, I use my hairdryer to reheat the hot hide glue, after clamping. Sometimes I'm not fast enough to clamp; heating it with the hairdryer reactivates the glue. I get good, firm, joints now. An added bonus is that my builds are more accurate now that I don't have to rush when gluing.
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Kbore
Posts: 299
Joined: Sun Jun 25, 2017 3:58 pm
Location: St. Louis area

Re: Honduran Mahogany/Sitka OM

Post by Kbore »

Very nice.
Measure Twice,

Karl B
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Honduran Mahogany/Sitka OM

Post by Diane Kauffmds »

Box is closed. I've bent the binding. I've also put a wash coat of shellac on it.
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Honduran Mahogany/Sitka OM

Post by Kevin Sjostrand »

That sure is pretty wood Diane. Coming along nicely!!!
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Honduran Mahogany/Sitka OM

Post by Diane Kauffmds »

I thought I'd update the blog. I was (Note the past tense) using the Stewmac TruChannel binding system. Well, I was routing the purfling channel, when the bearing on my router jumped over the edge, routing a beautiful 1" circle on the left corner upper bout.

I said, "Oh fudge...(It really wasn't fudge, but I'm keeping this G rated).

I took photos and sold the jig within 5 hours on EBay. To be fair, I'm sure it was my mistake. I never got comfortable using it. Even at eye level, I couldn't tell if it was cutting at times.

So, I invested in the Fleishman jig that John sells. I like holding the router. I have more control.

So sadly, I've had to scrap the build and start over.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: Honduran Mahogany/Sitka OM

Post by Danl8 »

Diane Kauffmds wrote:...So, I invested in the Fleishman jig that John sells. I like holding the router. I have more control....
Me, too. I had 5 minutes of buyers remorse when I saw the Stewmac ad for that truchannel thing. Now I'm comfortable having made the right choice for John's jig. Still takes me 40 hours to do a 15 minute binding rout. (39.75 hr worrying and 0.25 hr doing)
Post Reply