Emery Cloth Question
-
- Posts: 3256
- Joined: Sun Mar 09, 2014 8:13 pm
Emery Cloth Question
I'm going to pick up emery cloth, the kind used to clean pipes that's 1.5" wide, for scribe sanding. Should I get 120g or 320g?
-
- Posts: 1716
- Joined: Wed Aug 13, 2014 12:14 pm
Re: Emery Cloth Question
I've tried plumber's emery cloth and not been terribly impressed by it. It does work, but I think actual sandpaper is better. (Your mileage may vary....)
As far as grit, I'd guess 120 might be my choice to try. 320 is pretty fine.
As far as grit, I'd guess 120 might be my choice to try. 320 is pretty fine.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: Emery Cloth Question
Tim Benware
-
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Emery Cloth Question
thats too easy I cut my sandpaper. I think I may have to break down and buy some of this
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 3256
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Emery Cloth Question
That's exactly what I've been looking for; thank you!