upgrading a binding machine to the Ridgid laminate trimmer
-
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
upgrading a binding machine to the Ridgid laminate trimmer
I like these trimmers so much I switched out my porter cables
https://www.youtube.com/watch?v=2Yzhppm ... e=youtu.be
https://www.youtube.com/watch?v=2Yzhppm ... e=youtu.be
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 3255
- Joined: Sun Mar 09, 2014 8:13 pm
Re: upgrading a binding machine to the Ridgid laminate trimm
Hey John, that's what I bought. I absolutely love it. It fits my hand, has tight tolerances and has a lifetime warranty. What more could you ask for!
-
- Posts: 414
- Joined: Fri Jul 03, 2015 2:45 pm
- Contact:
Re: upgrading a binding machine to the Ridgid laminate trimm
I tend to think of HD as just 1 step up from Harbor freight. However, I dumped my Bosch and Porter Cable laminate trimmers for 4 of these Rigids. There are pretty well designed and I've not been able to wear one out yet. Only wish they came in designer colors so I could spot the right one easier.--Bob
-
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: upgrading a binding machine to the Ridgid laminate trimm
agree this one is a fluke the ability to bolt it on the machine makes it very stout and the front adjustments are perfect.
I like it a lot better than the bosche and porter cables I had used in the past.
I like it a lot better than the bosche and porter cables I had used in the past.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: upgrading a binding machine to the Ridgid laminate trimm
Word of warning - Rigid's lifetime warranty is only good if you buy at Home Despot. I bought a drill/impact driver duo not available at HD, and the palm router for $10 off and no shipping both on the interweb. They would not honor the warranty.
But they are all great tools anyway
Ed
But they are all great tools anyway
Ed
Ed M
-
- Posts: 3255
- Joined: Sun Mar 09, 2014 8:13 pm
Re: upgrading a binding machine to the Ridgid laminate trimm
HD sells Porter Cable, Ridgid, Bosch, Milwaukee, Dewalt, and Wen. I'm curious as to why it would be like Harbor Freight. I would never buy any motorized tool from harbor freight.Bob Gleason wrote:I tend to think of HD as just 1 step up from Harbor freight. However, I dumped my Bosch and Porter Cable laminate trimmers for 4 of these Rigids. There are pretty well designed and I've not been able to wear one out yet. Only wish they came in designer colors so I could spot the right one easier.--Bob
-
- Posts: 1715
- Joined: Wed Aug 13, 2014 12:14 pm
Re: upgrading a binding machine to the Ridgid laminate trimm
Can you get collets other than 1/4" for it?
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: upgrading a binding machine to the Ridgid laminate trimm
I don't think so The owners manual is on line
http://www.homedepot.com/catalog/pdfIma ... 3cabb0.pdf
http://www.homedepot.com/catalog/pdfIma ... 3cabb0.pdf
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com