This is my first time acoustic guitar(000-12F) build from Japan.
Im planning to buy Router like 'bosch colt' and binding machine.
I found LMI and stewmac sells nice one.
[LMI Professional Binding Machine]
https://www.lmii.com/products/tools-ser ... ng-machine
https://www.lmii.com/products/tools-ser ... r-bearings
[TrueChannel Binding Router Jig]
http://www.stewmac.com/Luthier_Tools/Ty ... s_Set.html
http://www.stewmac.com/Luthier_Tools/Ty ... t_Set.html
I would like you to tell me which system is good or bad.
And I found stewmac cutter & bearings set is much cheaper than LMI.
Is there any quality difference?
Stewmac cutter & bearings fit for LMI bending machine?
Thank you.
Masato
binding machine, cutter & bearings
-
- Posts: 8
- Joined: Tue Oct 27, 2015 1:03 pm
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: binding machine, cutter & bearings
We also carry the binding machines. what is your voltage requirement ? If you have 120 Vac I would use the ridgid router it is bolted on the machine and all adjustments are independent of the base . You can be very accurate. I also carry and use the binding machines and the bearing set. I like the one we have as it has the sizes etched into the bearings and makes figuring out the needed one a lot easier
http://www.bluescreekguitars.com/shop/i ... x&cPath=43
http://www.bluescreekguitars.com/shop/i ... x&cPath=43
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 156
- Joined: Sun Jan 18, 2015 8:49 pm
- Location: Irmo, SC
Re: binding machine, cutter & bearings
Definitely contact John! He will make sure you get the right stuff along with expert assistance and advise! He is awesome!