Neck reset
-
- Posts: 87
- Joined: Tue Mar 11, 2008 9:09 am
Neck reset
How many times can the neck be reset by flossing the cheeks before the angle becomes too much and creates a hump at the body joint??
-
- Posts: 709
- Joined: Wed Jan 11, 2012 9:42 pm
- Location: Hummelstown, PA
- Contact:
Re: Neck reset
Often times when doing a neck re set you will need to shim the fret board extension so it follows the proper plane. As long as that its done there should be no issues with a hump or dip and the procedure can be done many times if needed.
You never know what you are capable of until you actually try....
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
-
- Posts: 7027
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Neck reset
What Howard said, it isn't that you will get a hump as much as the extension will stay flat on the top and the neck will be hinged back. If this is a customers instrument I will be sure to communicate to them. If the fall off is noticeable I like to wedge it so the extension is true to the neck.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com