Here is a good source for clamps that I use for setting the blocks. Grizzly cataloge pg 377
http://www.grizzly.com/products/4-Claw-C-Clamp/H5747
I like the split surface on them. Works great with a lexan pad.
great clamps for gluing in neck and tail blocks
-
- Posts: 7011
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
great clamps for gluing in neck and tail blocks
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: great clamps for gluing in neck and tail blocks
I've seen those. Do use one or two when doing the glue up?
Tim Benware
-
- Posts: 7011
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: great clamps for gluing in neck and tail blocks
I use 2 per block
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 38
- Joined: Wed Dec 28, 2011 9:22 am
Re: great clamps for gluing in neck and tail blocks
I have a couple of those. I got mine at Lowe's (as I recall). Mine are made by Bessey, but look identical.
Bryan