Easy hook on razor blades
Easy hook on razor blades
I have a scraper burnisher from Veritas, and it works great. A lot of the time, though, what I need is a very sharp razor blade with a hook on it. Which can be done by burnishing the blade on a hardened steel surface. However that is not always accurate.
So I pulled the carbon rod out of the Veritas burnisher, turned it around and reinserted it with the carbon rod on the outside. You can burnish the razor blade accurately, draw out a hook to different degrees, and that can be a real help.
DaveB
So I pulled the carbon rod out of the Veritas burnisher, turned it around and reinserted it with the carbon rod on the outside. You can burnish the razor blade accurately, draw out a hook to different degrees, and that can be a real help.
DaveB
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3728
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Easy hook on razor blades
Hey I have one of those, I'll give it a try.
Kevin
Kevin
-
- Posts: 608
- Joined: Mon Mar 13, 2006 12:34 am
- Location: Wilmette, IL
Re: Easy hook on razor blades
I just run it against my vice, but that looks pretty cool.
Ken Hundley
Nocturnal Guitars
http://www.nocturnalguitars.com
So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
Nocturnal Guitars
http://www.nocturnalguitars.com
So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
Re: Easy hook on razor blades
Vice works fine, and if I did not have this that's what I would be using. This device does allow you to set the hook on the razor at various angles, but that's not such a big deal.
DaveB
DaveB
-
- Posts: 608
- Joined: Mon Mar 13, 2006 12:34 am
- Location: Wilmette, IL
Re: Easy hook on razor blades
It would actually be really nice....you approach scraping wood a bit differently than scraping a little finish drip, and this could really allow you to fine tune the scraper.
Ken Hundley
Nocturnal Guitars
http://www.nocturnalguitars.com
So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
Nocturnal Guitars
http://www.nocturnalguitars.com
So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
-
- Posts: 61
- Joined: Tue Nov 22, 2011 5:10 pm
Re: Easy hook on razor blades
How do you find that burnishing tool, I tried mine and was a bit dissapointed ?
J
J
Re: Easy hook on razor blades
I think mine came from Lee Valley. Woodcraft also has them:
http://www.woodcraft.com/product/200373 ... isher.aspx
http://www.woodcraft.com/product/200373 ... isher.aspx
-
- Posts: 134
- Joined: Sat Sep 18, 2010 12:05 am
- Location: Charlotte, North Carolina
- Contact:
Re: Easy hook on razor blades
I use the smooth end of a dull 1/4" spiral carbide router bit. The key with whatever you use is using a light touch. It doesn't take much to draw a burr.