Today's pic

Post a photo of something you are working on today. No need to explain or write anything. A photo is worth a thousand words. If you must write something caption your photo with the "File Comment" field when uploading an attachment. Keep it short and show us some photos!
Forum rules
Pictures please.
Post Reply
John J
Posts: 296
Joined: Wed Nov 26, 2014 7:52 pm
Location: Saint Paul, MN

Today's pic

Post by John J »

Close up.
You do not have the required permissions to view the files attached to this post.
Learning every day.
Bob Gleason
Posts: 412
Joined: Fri Jul 03, 2015 2:45 pm
Contact:

Re: Today's pic

Post by Bob Gleason »

John, 1. Was that done with a router or chisel? 2. Before or after the top and back were on? Just curious. Your photo made me think of new ways I might approach doing that little piece of binding in the future. Thanks, Bob
John J
Posts: 296
Joined: Wed Nov 26, 2014 7:52 pm
Location: Saint Paul, MN

Re: Today's pic

Post by John J »

Bob
I closed the box first. Scored the lines with a scalpel and then used a dremel in a StewMac base to rout the channel. I've found if you score the line well you can rout right to the edge freehand. A very steady freehand.
Learning every day.
Bob Gleason
Posts: 412
Joined: Fri Jul 03, 2015 2:45 pm
Contact:

Re: Today's pic

Post by Bob Gleason »

John,
Thanks for the reply.-Bob
Post Reply