EIR Cutaway Dred with Torrified Top

Post Photos and Link Us to Your Guitars!
Post Reply
Rag Thumb
Posts: 75
Joined: Sat Mar 24, 2018 5:41 pm
Location: Durham, NC

EIR Cutaway Dred with Torrified Top

Post by Rag Thumb »

This is my recently completed project and first-time cutaway build. The back and sides are EIR and the top is torrified Adirondack Spruce.

The gentleman I built this for wanted his guitar to be unique so he chose the bird motif on the headstock and fretboard. The beaks on the birds proved to be a real bugger to inlay. He also wanted to do the pearl around the perimeter and the sound hole, which really sets it off against the Ivoroid binding.

As most of my builds go, it took me forever to get the finish where I wanted it. This one has Shellac Finishes post cat Royal Lac product.

I will try to get a decent sound file to attach to this post when my buddy/customer can come over after Covid. I certainly am not able to play well enough to record it, but to my ears it has a very bright sound and is quite a boomer.

I am going to be adding a K & K Mini pickup after I refine the setup in a few weeks. The initial setup was surprisingly good and this one is easily playable.
Jankowski side.jpg
Jankowski back.jpg
Jankowski headstock.jpg
You do not have the required permissions to view the files attached to this post.
------------

Rex
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: EIR Cutaway Dred with Torrified Top

Post by tippie53 »

love the bird
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
ruby@magpage.com
Posts: 1564
Joined: Thu May 24, 2012 8:03 am
Location: Chestertown Maryland

Re: EIR Cutaway Dred with Torrified Top

Post by ruby@magpage.com »

very nice. What about a close up of the rosette and purfling?
Ed M
jread
Posts: 560
Joined: Wed Feb 13, 2019 9:52 am
Contact:

Re: EIR Cutaway Dred with Torrified Top

Post by jread »

Incredible. The inlay work is very eye catching. The whole thing is a beauty. Looking forward to sound even if you just strum an open tuning. I also stuggle w/ the demos.
Rag Thumb
Posts: 75
Joined: Sat Mar 24, 2018 5:41 pm
Location: Durham, NC

Re: EIR Cutaway Dred with Torrified Top

Post by Rag Thumb »

Ed asked to see pictures of the binding and the rosette, so here goes.

As you can tell, I'm not much with a camera either.
Jankowski binding - post.jpg
Jankowski rosette post.jpg
You do not have the required permissions to view the files attached to this post.
------------

Rex
ruby@magpage.com
Posts: 1564
Joined: Thu May 24, 2012 8:03 am
Location: Chestertown Maryland

Re: EIR Cutaway Dred with Torrified Top

Post by ruby@magpage.com »

very clean, well done
Ed M
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: EIR Cutaway Dred with Torrified Top

Post by Danl8 »

Very pretty guitar! I like your binding/purfling and rosette; perfect match for the top.
Post Reply