woodline Luthier 19 pc router bit set
-
- Posts: 7017
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
woodline Luthier 19 pc router bit set
I am proud to tell you all that I am now a dealer in these bearing sets. $139
you can order direct from out website at blues creek or feel free to PM me
thanks again for your support
you can order direct from out website at blues creek or feel free to PM me
thanks again for your support
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 107
- Joined: Mon Oct 08, 2012 3:55 pm
- Location: Ormond Beach, FL
- Contact:
Re: woodline Luthier 19 pc router bit set
Great to see you are handling this John. They work great and are so much cheaper than the alternatives!!!
Sylvan Wells
Wells Guitars
Bay State Guitars
http://www.wellsguitars.com
http://www.baystateguitars.com
Wells Guitars
Bay State Guitars
http://www.wellsguitars.com
http://www.baystateguitars.com
-
- Posts: 7017
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: woodline Luthier 19 pc router bit set
I tried them on your recommendation Sylvan and they are indeed better than anything out there. I love the convenience of having the bearings with an etched size , no looking or guessing. The case is a plus and it can indeed to the full spectrum from the Martin D45 to just a simple binding.
The other point is the width of the bearings, unlike the Stew mac set I had was too thin and you had to do the wide cut before the deep cuts.
I won't use anything else.
The other point is the width of the bearings, unlike the Stew mac set I had was too thin and you had to do the wide cut before the deep cuts.
I won't use anything else.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 3727
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: woodline Luthier 19 pc router bit set
Nice,
What are the bearing sizes/channel cut size?
Kevin
What are the bearing sizes/channel cut size?
Kevin
-
- Posts: 210
- Joined: Wed Jan 25, 2012 1:44 pm
- Location: Bay Area
Re: woodline Luthier 19 pc router bit set
"This rabbet router bit with 19 bearings is used to cut purfling/binding channels on guitars or any other woodworking project that requires precise cut ledges. The biggest frustration when cutting binding ledges on guitars is when you must cut a ledge that is precisely the same width as the binding material. With these bearings that fit on the tip of the bit, you can adjust the width of the cut by .010 by using each bearing to get an exact cut for your binding."Kevin Sjostrand wrote:Nice,
What are the bearing sizes/channel cut size?
The cutting blade is 1" in diameter and the cutters are carbide tipped.
The shaft length is 1.32" and the shaft diameter is .25".
.880 diam. .060 binding ledge
.860 diam. .070 binding ledge
.840 diam. .080 binding ledge
.820 diam. .090 binding ledge
.800 diam. .100 binding ledge
.780 diam. .110 binding ledge
.760 diam. .120 binding ledge
.740 diam. .130 binding ledge
.720 diam. .140 binding ledge
.700 diam .150 binding ledge
.680 diam. .160 binding ledge
.660 diam. .170 binding ledge
.640 diam. .180 binding ledge
.620 diam. .190 binding ledge
.600 diam. .200 binding ledge
.580 diam. .210 binding ledge
.560 diam. .220 binding ledge
.540 diam. .230 binding ledge
.500 diam. .250 binding ledge
-
- Posts: 3727
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: woodline Luthier 19 pc router bit set
That is an awesome variety of bearings.
Next time I need a new bit I'll sure consider this set.
Kevin
Next time I need a new bit I'll sure consider this set.
Kevin
-
- Posts: 36
- Joined: Mon Aug 19, 2013 11:33 pm
Re: woodline Luthier 19 pc router bit set
Hi John H.
This is nice, a complete binding bearing set, with many other uses. I'm setting up shop in a few weeks. I will order soon thanks for the heads up John.
The new newbie Stephen C. songman101
This is nice, a complete binding bearing set, with many other uses. I'm setting up shop in a few weeks. I will order soon thanks for the heads up John.
The new newbie Stephen C. songman101