Naptha/mineral spirits before pore filling/finishing?
-
- Posts: 29
- Joined: Sun Jun 28, 2015 5:48 pm
- Location: Vancouver, WA
Re: Naptha/mineral spirits before pore filling/finishing?
Mike - I use water to raise the grain. This is really helpful with soft woods like spruce and even Mahogony. Before pore filling with zpoxy, I thoroughly clean the wood with naphtha. I'll keep cleaning with naphtha and paper towels until the towels aren't picking up any dust or dirt.
-
- Posts: 53
- Joined: Tue Mar 01, 2016 5:10 pm
Re: Naptha/mineral spirits before pore filling/finishing?
I just dampen the wood over night to raise the grain. Do the final sanding and clean the wood with naphtha.
-
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Naptha/mineral spirits before pore filling/finishing?
I use naphtha , mineral spirits and acetone , then seal and fill. I still use the paste filler ( pore o paq ). I never had luck with the zpoxy. Use what you find works the best for you. We all have our favorites.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 709
- Joined: Wed Jan 11, 2012 9:42 pm
- Location: Hummelstown, PA
- Contact:
Re: Naptha/mineral spirits before pore filling/finishing?
Depends on the work.....If you have wood bindings you must be careful not to drag color from the darker woods out and stain it and some woods do not require much in the way of oil removal. Typically I use DA for a wipe down prior to finish. A good isolation coat is worthwhile insurance on anything oily like Cocobolo.
You never know what you are capable of until you actually try....
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
-
- Posts: 3256
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Naptha/mineral spirits before pore filling/finishing?
I use naphtha and sometimes alcohol, depending on what I need to clean. I use Aquacoat to pore fill. It takes a few coats, esp because I use thin layers, but it does a superb job before french polishing.