I have been finishing my neck and body separately.
By the end of the weekend, I should be buffed out and ready to glue the neck on.
Do people "finish" the joint between the heel and the body?
If so, how?
Can I apply my newly-acquired drop-filling skills?
Thanx,
Finishing the neck joint???
-
- Posts: 827
- Joined: Thu Aug 12, 2010 9:11 pm
Re: Finishing the neck joint???
I don't do it personally. When you need to do a neck reset in the future, you have one less thing to worry about if you do not put finish un that area.
Last edited by Tony_in_NYC on Sun Jan 16, 2011 6:29 pm, edited 1 time in total.
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas
Re: Finishing the neck joint???
I would be concerned that over time the finish would "melt" into the finish on the body. If you later tried to do a neck reset, you might damage the body finish trying to seperate the neck from the body.
Slacker......
Re: Finishing the neck joint???
Thanks, all.
I won't finish it. The glue joint is pretty tight, and there are no visible gaps, so I think I'll be OK.
I won't finish it. The glue joint is pretty tight, and there are no visible gaps, so I think I'll be OK.
-
- Posts: 827
- Joined: Thu Aug 12, 2010 9:11 pm
Re: Finishing the neck joint???
I didn't even glue the joint on either of my finished guitars. I also didn't glue the fret board extension and I have had no issues at all.