www.KitGuitarsForum.com

Hi all.
I opened up a can of Behlen's vinyl sealer and found a white goo at the bottom of the can. I stirred it and it seemed to mix well somewhat. But I did spray well on some scrap wood.

Just wondering if this was a normal thing?

Thanks

Rick Gunn

Yes it is common for sanding sealers to separate during storage.

Thanks Brian.

I had switched over to Cardinal lacquer and had a couple of cans of Behlen on the shelf.

I was going to use it on a build just to see how it compared. Have not used Behlens in quite a while.

Thanks

Rick Gunn