Vinyl Sealer goo

The Achilles' Heel of Luthiery
Post Reply
watergunn
Posts: 277
Joined: Fri Nov 25, 2011 10:20 am
Location: Cumming, GA

Vinyl Sealer goo

Post by watergunn »

Hi all.
I opened up a can of Behlen's vinyl sealer and found a white goo at the bottom of the can. I stirred it and it seemed to mix well somewhat. But I did spray well on some scrap wood.

Just wondering if this was a normal thing?

Thanks

Rick Gunn
B. Howard
Posts: 709
Joined: Wed Jan 11, 2012 9:42 pm
Location: Hummelstown, PA
Contact:

Re: Vinyl Sealer goo

Post by B. Howard »

Yes it is common for sanding sealers to separate during storage.
You never know what you are capable of until you actually try....

Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services

Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
watergunn
Posts: 277
Joined: Fri Nov 25, 2011 10:20 am
Location: Cumming, GA

Re: Vinyl Sealer goo

Post by watergunn »

Thanks Brian.

I had switched over to Cardinal lacquer and had a couple of cans of Behlen on the shelf.

I was going to use it on a build just to see how it compared. Have not used Behlens in quite a while.

Thanks

Rick Gunn
Post Reply