Hi all.
I opened up a can of Behlen's vinyl sealer and found a white goo at the bottom of the can. I stirred it and it seemed to mix well somewhat. But I did spray well on some scrap wood.
Just wondering if this was a normal thing?
Thanks
Rick Gunn
Vinyl Sealer goo
-
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
-
- Posts: 709
- Joined: Wed Jan 11, 2012 9:42 pm
- Location: Hummelstown, PA
- Contact:
Re: Vinyl Sealer goo
Yes it is common for sanding sealers to separate during storage.
You never know what you are capable of until you actually try....
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
-
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
Re: Vinyl Sealer goo
Thanks Brian.
I had switched over to Cardinal lacquer and had a couple of cans of Behlen on the shelf.
I was going to use it on a build just to see how it compared. Have not used Behlens in quite a while.
Thanks
Rick Gunn
I had switched over to Cardinal lacquer and had a couple of cans of Behlen on the shelf.
I was going to use it on a build just to see how it compared. Have not used Behlens in quite a while.
Thanks
Rick Gunn