Polishing Compound
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Polishing Compound
Which polishing compound do you recommend for a final step when using shellac? Is Novus Plastic Polish 2 still recommended? I want to make sure that the product doesn't contain silicone. Do I need to order a product made for guitars?
-
- Posts: 135
- Joined: Wed Jun 01, 2011 10:30 pm
Re: Polishing Compound
I'll chime in here with my own experience, though I will enjoy learning what others use.
The Meguiar's auto polishes work well, and they are free of silicone. They are numbered. For a final polish, try Meguiar's #9 Swirl remover. Works very well and has little, if any, abrasive to it, so it won't take out scratches. The #7 does have a little bit of grit, and will take out some fine scratches. The finish looks pretty good after #7, but following with #9 yields pretty results.
I have used these polishes, thinking my finish was complete, only to decide I was not done adding shellac. I was able to switch right back to shellac without any kind of trouble.
The Meguiar's auto polishes work well, and they are free of silicone. They are numbered. For a final polish, try Meguiar's #9 Swirl remover. Works very well and has little, if any, abrasive to it, so it won't take out scratches. The #7 does have a little bit of grit, and will take out some fine scratches. The finish looks pretty good after #7, but following with #9 yields pretty results.
I have used these polishes, thinking my finish was complete, only to decide I was not done adding shellac. I was able to switch right back to shellac without any kind of trouble.
Slowest builder on the forum. These things take time. Apparently.
-
- Posts: 709
- Joined: Wed Jan 11, 2012 9:42 pm
- Location: Hummelstown, PA
- Contact:
Re: Polishing Compound
Novus #2 works well.
You never know what you are capable of until you actually try....
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Polishing Compound
I use mazzerna and maquires #9
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1715
- Joined: Wed Aug 13, 2014 12:14 pm
Re: Polishing Compound
I got StewMac's polish kit of coarse, medium, fine, and swirl remover. I haven't used them extensively, but they seem to work pretty well.
I've also tried Meguiar's #9, which also seems to do a good job although I wonder whether it leaves anything on the finish that would interfere with subsequent finish applications. Initial testing suggests it's not a problem, but I still wonder.
I've also tried Meguiar's #9, which also seems to do a good job although I wonder whether it leaves anything on the finish that would interfere with subsequent finish applications. Initial testing suggests it's not a problem, but I still wonder.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Polishing Compound
Thank you to all who replied. I appreciate all of your answers.