Swirl remover
-
- Posts: 709
- Joined: Wed Jan 11, 2012 9:42 pm
- Location: Hummelstown, PA
- Contact:
Re: Swirl remover
Glazing is the process of rubbing out the swirls. I have used lots of polishes over the years. Martin Senour's swirl remover was a favorite for a while but i have used some from 3M, Novus and others with good results. My latest favorite is something I make myself by combining a few different compounds and thinning them out for hand use with a cloth or felt block. If you are interested , PM me as I do sell small bottles of it.
You never know what you are capable of until you actually try....
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
Brian Howard
www.brianhowardguitars.com
Taylor authorized service
Custom finishing services
Brian howard's guitar building & repair blog
http://www.brianhowardguitars.com
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Swirl remover
I had found 3M hand glaze pretty good.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
Re: Swirl remover
Maybe i am doing this wrong.
I buff with the mazerna's and thrn use swirl remover and a wizards was.
Is the trick to rub it in and not let it dry?
It dries fast and is hard to remove.
I buff with the mazerna's and thrn use swirl remover and a wizards was.
Is the trick to rub it in and not let it dry?
It dries fast and is hard to remove.
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Swirl remover
yes keep it wet
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 219
- Joined: Wed Jan 30, 2008 11:36 pm
Re: Swirl remover
I use the cheap 3 dollar cotton buffing wheels from Harbor freight. I dictate one per grit (medium, fine, swirl, all menzerna). Swirl remover always gets it's own wheel, if not a new one. They are cheap, and essentially disposable. I keep them in freezer bags (quality zip locks) to try to keep them clean and safe.
The wheels go in a drill, and so you can a pretty good buff with out using any upper body ;)
-Dan
The wheels go in a drill, and so you can a pretty good buff with out using any upper body ;)
-Dan
-
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
Re: Swirl remover
Thanks Dan.
RG
RG