Shaping the peg head

The Achilles' Heel of Luthiery
Post Reply
jjadamson
Posts: 17
Joined: Fri Mar 15, 2013 11:12 pm
Location: Sydney

Shaping the peg head

Post by jjadamson »

When it comes to shaping the rear of the peghead, the v shape, where it joins the neck, I'm not quiet sure how this part is shaped on the Martin hd28 kit?
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Shaping the peg head

Post by tippie53 »

here is a pic while a 12 fret the valoute is the same
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
jjadamson
Posts: 17
Joined: Fri Mar 15, 2013 11:12 pm
Location: Sydney

Re: Shaping the peg head

Post by jjadamson »

Thanks again for your help
Post Reply