Pore Filling Mahogany Neck with Zpoxy

The Achilles' Heel of Luthiery
Post Reply
Ken Hundley
Posts: 608
Joined: Mon Mar 13, 2006 12:34 am
Location: Wilmette, IL

Re: Pore Filling Mahogany Neck with Zpoxy

Post by Ken Hundley »

Daryl, the best way to get it out of the frets that I have found is to take a regular stanly knife type razor blade, put a burr on the edge like you would a scraper, and gently scrape the layer of glue off.
Ken Hundley
Nocturnal Guitars
http://www.nocturnalguitars.com

So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
Top
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: Pore Filling Mahogany Neck with Zpoxy

Post by Darryl Young »

First coat of Zpoxy applied to the neck........finally! <smile>
First Coat Applied.JPG
You do not have the required permissions to view the files attached to this post.
Slacker......
Top
Kevin Sjostrand
Posts: 3721
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Pore Filling Mahogany Neck with Zpoxy

Post by Kevin Sjostrand »

Darryl,
That is purrrty. It's going to look great.

Kevin
Top
Post Reply

Return to “Finishing Your Guitar”