www.KitGuitarsForum.com

Learn to Kit Build a Guitar. Learn to Scratch Build a Guitar. Learn EVERYTHING Guitars Here!
It is currently Sat May 25, 2019 8:04 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: top runout
PostPosted: Tue May 07, 2019 2:45 pm 
Offline

Joined: Thu May 24, 2012 8:03 am
Posts: 1067
Location: Chestertown Maryland
Explaining runout is pretty easy if you have piece of wood that is perhaps a 2X4, but explaining what happens when light hits the two halves a perfectly book matched thin thin piece like a top is not so easy. Today I was driving through our rural landscape - Kent County MD, called the best agricultural land in the state - and I ran across something.

Thinking of the fibers of wood as straws, the perfect top is one that is both vertical grained AND the straws run full length without poking out of the surface anywhere - harder to do with thin wood

1) Here is last year's corn harvest and the remaining short stalks are tipped the direction the harvester was driving. Think of these as the fibers/straws that are inside the wood

2) Stepping back, we can see light and dark areas where the sun hits the flat side of the corn stalk or the end of each hollow tube

3) In the center you can see the color difference as a line where the harvester was going opposite directions

Just like the top where the light is hitting the face or the ends of the fibers in the top


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: top runout
PostPosted: Wed May 08, 2019 6:21 am 
Offline

Joined: Mon Jul 28, 2014 7:50 am
Posts: 658
Location: Chadds Ford, PA
Interesting analogy. This would be part of the reason for preferring tops coming from split billets as opposed to sawn billets? Ultimately the angle of fiber orientation & related fiber length would seem to be a critical strength consideration.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group