Dimensions of a 1950 Gibson LG-2 bridge?
-
- Posts: 1722
- Joined: Wed Aug 13, 2014 12:14 pm
Dimensions of a 1950 Gibson LG-2 bridge?
Can anybody tell me the dimensions (LXWXH) of a 1950 Gibson LG-2 bridge? The thickness of the thinned ends would also be helpful.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 7023
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Dimensions of a 1950 Gibson LG-2 bridge?
I have seen them vary I think the bridge was often sanded to match the neck set.
The one I have is about .100 on the wings 1 by 6
rectangular bridge
The one I have is about .100 on the wings 1 by 6
rectangular bridge
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com