Rosette
-
- Posts: 87
- Joined: Tue Mar 11, 2008 9:09 am
Rosette
I'd like to remove and replace the rosette on a guitar I'm rebuilding. It's an old Yamaha 12-string. How do I go about that?
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Rosette
carefully
what does the original rosette look like?
what does the original rosette look like?
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 87
- Joined: Tue Mar 11, 2008 9:09 am
Re: Rosette
You can see what it looks like pretty well here-https://reverb.com/item/616660-yamaha-f ... MhQ&pla=1- mine doesn't have the pick guard on it.
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Rosette
chances are you may cause damage.
you have to take the neck off first then try removing the rosette but taking out the middle of them first the hope you can pull the rest out without harm .
it isn't easy
you have to take the neck off first then try removing the rosette but taking out the middle of them first the hope you can pull the rest out without harm .
it isn't easy
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1715
- Joined: Wed Aug 13, 2014 12:14 pm
Re: Rosette
This may or may not be a good idea, but what I would probably do is make a plug for the sound hole with a 1/8" dia. center hole for the pivot pin of my router's circle cutter attachment. Then I would use the router to cut out the old rosette.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Rosette
I did this with a top I made, using the technique that you're going to use. First and foremost, anchor that top well. I made the plug, found center, and I thought I had the top anchored. As I routed, it started spinning on me when I was half way around. Also, the top under the rosette was so fragile that it came apart in a couple of places.
I had the advantage of a new, unbraced top. I can't imagine doing this with braces in place. I was able to do it, but it was touch and go.
I had the advantage of a new, unbraced top. I can't imagine doing this with braces in place. I was able to do it, but it was touch and go.