Page 1 of 1
nec set procedure on a Martin D28
Posted: Sun Jan 24, 2016 11:43 am
by tippie53
My friend Maury at Maury's music had visited us at the shop and did a video on a martin neck reset .
hope you find it interesting.
http://www.maurysmusic.com/maury_s_blog ... t___part_1
Re: nec set procedure on a Martin D28
Posted: Sun Jan 24, 2016 11:49 am
by Diane Kauffmds
I definitely want to see that. Thanks!
Re: nec set procedure on a Martin D28
Posted: Sun Jan 24, 2016 11:59 am
by tippie53
I sent the video to Glenn and he is editing it and I will post that link when it is ready
Re: nec set procedure on a Martin D28
Posted: Sun Jan 24, 2016 2:04 pm
by Diane Kauffmds
I like the use of the heat blanket on the fretboard extension. I'm going to look into buying or making one. Thanks for the Video John. Are most of your conversions 12 to 6 string conversions? You talked about replacing the top. It it necessary to do this because of a bracing difference between the 12 and 6 string?
Re: nec set procedure on a Martin D28
Posted: Sun Jan 24, 2016 4:29 pm
by tippie53
most conversions are to pre 37 spec from modern . That is the herringbone forward shift scalloped braces with red spruce top or a full 45 .
Often the tops are removed binding upgraded .
Re: nec set procedure on a Martin D28
Posted: Sun Jan 24, 2016 4:48 pm
by Diane Kauffmds
I gotcha.
Re: nec set procedure on a Martin D28
Posted: Sun Apr 24, 2016 5:17 pm
by Benjy
Very good video! I actually believe that I can do a reset with all these great videos that you do!
Thanks John!
Benjy