What's the best way...

Even if it ain't broke you can still fix it.
Post Reply
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

What's the best way...

Post by Ben-Had »

to remove the wooden plate covering the bolts on a Martin 15 series bolt-on neck block?
Tim Benware
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: What's the best way...

Post by tippie53 »

this is simple
it is a foam double stick tape
I use a fresh razor blade
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: What's the best way...

Post by Ben-Had »

Excellent. Thanks John.
Tim Benware
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: What's the best way...

Post by tippie53 »

you are most welcome
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply