Page 1 of 1
Bending Purfling
Posted: Sat Sep 15, 2012 11:35 am
by
Re: Bending Purfling
Posted: Mon Sep 17, 2012 1:51 pm
by Darryl Young
John,
I was unclear after watching the video. You were finished bending when the temp was about 240F. Did you let the purfling "cook" at that temperature for 5 min or so or did you shut the controller off at that temp (the bending was finished).
Would I use a similar procedure for herringbone?
Thanks!
Re: Bending Purfling
Posted: Mon Sep 17, 2012 4:01 pm
by tippie53
When I am finished bending , and by that I mean that I have the product on the bending pattern I will usually use about 5 to 10 min at a lower heat 190F or so to help dry things off, Herringbone I will bend about 220F than allow to cool and set in the bender over night