Re: Erlewine bridge position jig
Posted: Wed Dec 12, 2018 9:57 pm
I use a homemade temporary tailpiece to locate the bridge and later compensate the saddle.
Works for me.......
Works for me.......
Learn to Kit Build a Guitar. Learn to Scratch Build a Guitar. Learn EVERYTHING Guitars Here!
https://www.kitguitarsforum.com/board/
https://www.kitguitarsforum.com/board/viewtopic.php?f=5&t=8608
That sounds like something I would make. Lolrobinsonb5 wrote:I bent a piece of wire coat hanger so that I could hang it on the strap button and attach the outer two strings. Not pretty, and needed a little padding where it went around the corner, but it worked nicely!