New Rosette
-
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
New Rosette
Hi Folks,
I haven't been building much over last couple months as Life seems to have gotten in the way - but back onto my 2 guitars I have in progress. Working on a Rosette for my Larson Brothers Prairie State Jumbo Inspired guitar. I was looking at pics of older Larson Brothers, and I liked the combo of marquetry with pearl. Following is the rosette that is is progress. Note the white plastic filler strip will be replaced with some nice Paua shell. What I really liked about the old Larson i saw was the red in the rosette.
Here is the outer and inner bands already inlaid with bl/maple/bl (.20/.20/.20) strips. The middle ring is about .305", and was a pain as a lot of thin pieces to get into place (had visions of how this is going to be difficult when i get to the binding - cause it will get the same exact treatment with the pearl, etc). Got a little chip out on the top while routing... which is the first time i have had that issue - was new bit as well.: Here is the rosette installed, rough, and taped: Here is the rosette scraped a bit to get an idea of what it will look like. Next up is to remove the plastic filler strip and put shell in. Will be following same procedure John highlights in the Style 40 Purfling video - Cracking it into place. Glenn
I haven't been building much over last couple months as Life seems to have gotten in the way - but back onto my 2 guitars I have in progress. Working on a Rosette for my Larson Brothers Prairie State Jumbo Inspired guitar. I was looking at pics of older Larson Brothers, and I liked the combo of marquetry with pearl. Following is the rosette that is is progress. Note the white plastic filler strip will be replaced with some nice Paua shell. What I really liked about the old Larson i saw was the red in the rosette.
Here is the outer and inner bands already inlaid with bl/maple/bl (.20/.20/.20) strips. The middle ring is about .305", and was a pain as a lot of thin pieces to get into place (had visions of how this is going to be difficult when i get to the binding - cause it will get the same exact treatment with the pearl, etc). Got a little chip out on the top while routing... which is the first time i have had that issue - was new bit as well.: Here is the rosette installed, rough, and taped: Here is the rosette scraped a bit to get an idea of what it will look like. Next up is to remove the plastic filler strip and put shell in. Will be following same procedure John highlights in the Style 40 Purfling video - Cracking it into place. Glenn
You do not have the required permissions to view the files attached to this post.
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: New Rosette
That's nice. Did you glue up the black white and cut tiles for the stuff adjacent to the pearl?
-
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
Re: New Rosette
For the dentile strips, i used my most important tool awhile ago, my computer, and I designed and ordered through Gurian :-)
Glenn.
Glenn.
-
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
Re: New Rosette
Continued putting the pearl in. The pearl is sitting a bit lower than the rest, so will put through my sander till the top comes down to the pearl:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: New Rosette
that looks sweet
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 299
- Joined: Sun Jun 25, 2017 3:58 pm
- Location: St. Louis area
-
- Posts: 35
- Joined: Fri Mar 04, 2016 10:30 pm
Re: New Rosette
Looks good, nice work there. Keep us posted on your progress
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: New Rosette
Beautiful. I am a big fan of colors added to rosettes and purfling. How much length do you have to order from Gurian on a custom order. Is it expensive?
Ed
Ed
Ed M
-
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
Re: New Rosette
Hi Ed,ruby@magpage.com wrote:Beautiful. I am a big fan of colors added to rosettes and purfling. How much length do you have to order from Gurian on a custom order. Is it expensive?
Ed
Yeah, you have to commit to a full layup... which is pretty expensive. However, I still owe you strips of what i have - I will get to it, I promise.
Glenn
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: New Rosette
Wow, it looks great! Love your use of color.