Building off the Stewmac 000 plans
Posted: Thu Oct 12, 2017 2:09 pm
So after a bit of a hiatus from building I'm getting back at it. Plan is to build two 000 12 frets off the Stewmac plans, one mahogany with red spruce top and one rosewood with engleman top. I've heard there are some plans out there that may be over braced and such. My question is, are there any recommendations of things to change from the stewmac plans, or will I get a good sounding guitar by following the plans.
Any other suggestions always welcome!
Any other suggestions always welcome!