Re: Back braces on #1
Posted: Sat Mar 26, 2016 7:42 pm
I used a 1" thick piece of dense foam rubber to support the radius on the back and top. The dense foam allows for the top/back plate to be fully supported, but allows enough "give" so that they will conform to the radius of the braces. I put it on the bottom of my gobar deck, stick the back/top on it, then glue the braces. As the gobars put pressure on the braces, the plate sinks into the foam just enough so that the radius is formed.
Using the foam allows for different radii as well.
You can pick up a piece at any fabric/sewing store.
Inexpensive and it works.
Using the foam allows for different radii as well.
You can pick up a piece at any fabric/sewing store.
Inexpensive and it works.