Rosewood Jumbo
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Rosewood Jumbo
I use the same clips. You're right; there's no such thing as too many clips or clamps.
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
The top rim kerfing is in place
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
Don't you just hate it when you think you are ready to glue the back pieces and the center strip and then you see a gap. Fortunately no glue had been applied yet.
Back to the ole shooting board to true up the edges.
Back to the ole shooting board to true up the edges.
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
Driving the bus
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
I finally got the back pieces trued-up. I really like John's CA method of joining the center strip to the back piece. Is naptha preferred for cleaning rosewood after I've finished with the scraper?
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
Radius on the back braces
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 561
- Joined: Wed Feb 13, 2019 9:52 am
- Contact:
Re: Rosewood Jumbo
For sure. I used clothespins to save $ for this step and found they were strong enough without adding rubber bands. I had close to 200 on there overnight doing both sides.Diane Kauffmds wrote:I use the same clips. You're right; there's no such thing as too many clips or clamps.
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
Laying out the top braces
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
Gluing some of the top braces using a go bar deck
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Rosewood Jumbo
Thinking about a bound fingerboard
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop