:-) Probably not so inspired, but more like those crazy hoarders on TV. I made a 00 deep body (pictured somewhere here on KGF) for my son, who is an avid player. The rest can be sold or donated by my wife after I depart this life. With Martin quality as a comparison, my building fit and finish isn't worth selling or at least I couldn't recoup expenses and would eventually not be able to sustain the hobby. For now, I'm focusing on the process and continuous improvement mindset that John Hall taught me during my time at BCG and things are getting better. BTW, I did sell lutes, those were good enough to sell.nkwak wrote:Wow! That's inspiring! You say you've kept them all? Have you given any away or been asked to build one by someone you know?
Next project(s)
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Next project(s)
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Next project(s)
Getting around to finishing the sinker mahogany dred. Still have to cut the nut, install the bridge and polish/clean, but it is almost ready for the strings. The top is torrefied spruce and unfortunately has a midline crack, but that has stabilized. I am inclined to avoid torrefied wood now -- it seems too friable for my liking. Most of my tops are over forty yrs; if they aren't dry now when will they ever be? Anyhow, this guitar will be very lively. A few pix...
You do not have the required permissions to view the files attached to this post.
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Next project(s)
one more pic, closer view of rosette, paua and burl veneer. I used the same carpathian elm burl for the head and end graft too.
Edit: June 1. Strings on. Very happy with sound -- rich deep bass, balanced midrange and high registers are very clear, bell-like. Still haven't polished the lacquer, but for a rattle can finish, it's ok as is.
Edit: June 1. Strings on. Very happy with sound -- rich deep bass, balanced midrange and high registers are very clear, bell-like. Still haven't polished the lacquer, but for a rattle can finish, it's ok as is.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Next project(s)
Final pix and post for this series of guitars and, now, on to other projects. I have a swivel breech flintlock rifle that has to be finished this summer, a 25-string baroque lute that has to be finished this autumn, and a long list of spousal projects. Maybe I'll return to guitar-making late this year. BTW, thanks to RC Tonewoods for the nice sinker for this dred. Nice stuff to work and primo figure.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 15
- Joined: Mon Jul 02, 2018 12:21 pm
Re: Next project(s)
Very nice work, IMO.
-
- Posts: 299
- Joined: Sun Jun 25, 2017 3:58 pm
- Location: St. Louis area
Re: Next project(s)
Your guitar work is stunning. I have a question about the tortoise celluloid binding. After finish sanding my project with tortoise celluloid, the bindings show 220 grit scratches. Will those disappear when I apply the Nitro finish? I had some tiny pieces of binding left over and did a sample, spraying with Nitro, but the binding did not turn out glass like smooth. Also tried a acetone "polish" that turned out not so beautiful. How do you get the bindings glossy again?Danl8 wrote:.... I used wood purfling and celluloid tortoise...
Measure Twice,
Karl B
Karl B
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Next project(s)
looks great
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Next project(s)
Hi Karl,Kbore wrote:Your guitar work is stunning. I have a question about the tortoise celluloid binding. After finish sanding my project with tortoise celluloid, the bindings show 220 grit scratches. Will those disappear when I apply the Nitro finish? I had some tiny pieces of binding left over and did a sample, spraying with Nitro, but the binding did not turn out glass like smooth. Also tried a acetone "polish" that turned out not so beautiful. How do you get the bindings glossy again?Danl8 wrote:.... I used wood purfling and celluloid tortoise...
Thanks for the kind words. I sanded progressively 220-320-400-600-800-1200-1500 very gingerly on the binding. The nitro then made the surface glossy (binding and wood, too) after successive coats and sanding between rattle sessions.
-d.
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Next project(s)
Thanks, John. And Mike Baker, too.tippie53 wrote:looks great
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Next project(s)
You did a beautiful job.