www.KitGuitarsForum.com
http://www.kitguitarsforum.com/board/

1st Acoustic Kit Build
http://www.kitguitarsforum.com/board/viewtopic.php?f=48&t=7752
Page 6 of 6

Author:  joseph d [ Sun Mar 18, 2018 3:44 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Well OK - I guess I misunderstood the video. The 25-1/2" is to center of saddle at the high E....I was pulling 25-1/2" to the center of the bridge or between the D and G strings. The bridge squares up much better with that lay-out...imagine that.

Author:  Danl8 [ Sun Mar 18, 2018 4:05 pm ]
Post subject:  Re: 1st Acoustic Kit Build

I think that should be 25.4 + 0.1" compensation over the first string and 25.625" over the sixth string. I measure nut to front edge of the saddle (gives a pinch of room for eventual rolling forward moment). Basically it is 2 x distance from nut to 12 fret crown plus 0.10" compensation over the e' and adding another 0.125" over the e sixth string. So far for eleven instruments I'm getting near perfect intonation, maybe someone can let me know if I have it wrong.

Author:  joseph d [ Sun Mar 18, 2018 4:30 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Thanks Danl8! I need to get a ruler in decimal, all I have right now is imperial making for a tiny bit of fudging the number. I really appreciate the info!
Doesn't 0.625 equal 5/8" pretty close?
So 25.4 + 0.1 = 25.5" (or 25-1/2")
Then 25.5 + 0.125 = 25.625 (or 25-5/8")...I hope so cause I'm already going with it :)

Author:  Diane Kauffmds [ Sun Mar 18, 2018 10:44 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Okay, using imperial measurement, This is how you place your saddle.

25 1/2", (25.4" scale length + 1/10" for compensation), from the fretboard side of the nut, to the center of the saddle slot, following the line of string 1.

Add 1/8" to that measurement, which makes it 25 5/8" (including the 1/10" for compensation), from 0 fret (nut) to the center of the saddle slot, following the string line for string 6.

Author:  joseph d [ Mon Mar 19, 2018 4:33 am ]
Post subject:  Re: 1st Acoustic Kit Build

Yes that is what I used. Not sure how I missed that in the video. Watched it again and it was plainly stated.

Author:  joseph d [ Sat Apr 28, 2018 1:51 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Well got the guitar strung up finally. This Blues Creek Kit was awesome and the only problems with it were my mistakes. Tried hot hide glue for the 1st time and that was a little bit of a learning curve...glued the neck in and it set up on me before I had it clamped. Learned how to pull an acoustic neck and reset it..put a few little scratchs pulling it off but not bad for my 1st go at pulling a neck if I say so myself.
Ended up with the string height at 4/64th on the high E and 6/64th on the low E. I'm going to put a bit more relief in the neck so I'll see how that ends up.
All in all in was a great learning experience and I'm toying with doing another kit before building one from scratch. I've got some family issues going on and time seems to be real scarce.

Author:  Danl8 [ Sat Apr 28, 2018 2:01 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Dang, that's nice. Finish as well as overall guitar looks great! Good luck on the next one...

Author:  joseph d [ Sat Apr 28, 2018 2:07 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Thanks Danl8.

Author:  jabbiati [ Tue Oct 30, 2018 9:43 am ]
Post subject:  Re: 1st Acoustic Kit Build

Looks great! I appreciate your attitude about looking at mistakes as chances to learn more skills (i.e. repair skills)... I'm trying to do that, too! Helps keep the depression at bay.

Great job.

Author:  ruby@magpage.com [ Tue Oct 30, 2018 12:00 pm ]
Post subject:  Re: 1st Acoustic Kit Build

Dan

John at Blues Creek will work with you however you want him to. He has sent me a partial kit bent sides and a neck, he has twice bent sides that I sent him, and he will sell you any supplies you need at very reasonable prices. I did not go completely scratch until #5 where I did everything. Now just stringing up #8 and gaining confidence in every step with each one.

By the way, nice looking guitar - how does it sound?

Ed
It's not a mistake unless you can't fix it

Page 6 of 6 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/