#2 Wormy Bearclaw

Take us through building your guitar step by step. Post pictures and tell us what you're doing.
Post Reply
hummingbird
Posts: 277
Joined: Thu Nov 11, 2010 11:10 pm
Location: Ottawa, ON

Re: #2 Wormy Bearclaw

Post by hummingbird »

David. Your attention to detail is incredible. And your methods are ingenious. I never would have thought of the old hole in the board trick. The guitar is looking sweeeeeet.
Alain
David L
Posts: 1319
Joined: Thu Jan 06, 2011 8:04 pm
Location: Slidell, La

Re: #2 Wormy Bearclaw

Post by David L »

Thanks Alain!

David L
David L
Posts: 1319
Joined: Thu Jan 06, 2011 8:04 pm
Location: Slidell, La

Re: #2 Wormy Bearclaw

Post by David L »

Pore filling complete. I used Hoods Pore Filler.

David L

Image

Image

Image

Image

Image

Image

Image
deadedith

Re: #2 Wormy Bearclaw

Post by deadedith »

Good work! How did the Hood's work out for you?
David L
Posts: 1319
Joined: Thu Jan 06, 2011 8:04 pm
Location: Slidell, La

Re: #2 Wormy Bearclaw

Post by David L »

Hoods has worked good so far,we'll see when I start putting nitro on it.

David L
johnnparchem
Posts: 2354
Joined: Sat Apr 10, 2010 10:50 pm
Location: Seattle
Contact:

Re: #2 Wormy Bearclaw

Post by johnnparchem »

good looking guitar, I just noticed the bound heal cap. Nice touch. Are you going to drill your tuner holes after you spray?
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: #2 Wormy Bearclaw

Post by Kevin Sjostrand »

Looking really nice David, I would say you had better success with the Hoods then I did on my first attempt.
Yes, don't forget to drill the tuner holes.

Kevin
David L
Posts: 1319
Joined: Thu Jan 06, 2011 8:04 pm
Location: Slidell, La

Re: #2 Wormy Bearclaw

Post by David L »

I will definitely drill the tuner holes before I start to apply the finish!

David L
Post Reply