My checklist is in the form of an Libre Office document, so I'm not sure everyone can open it here. I've added it as a file to the post and it may show as a .pdf. However, in case anyone has problems opening it, I'll just list the items here.
I'll give you a little background. I have early onset Parkinson's Disease and my meds affect my memory. After doing brilliant things like, bracing the top before opening the soundhole, closing the box before installing the end graft, or installing the kerfing before the ribbon side struts, I made a checklist.
I put the checklist into a spreadsheet format, so I can literally check off each item. Each guitar that I build has a computer "build file", which includes photos, notes, and this checklist. I keep each checklist for each guitar, on my hard drive as well as in a backup, so I can call up the file at any time.
I think MS Office can open Libre Office files.
GUITAR BUILD CHECKLIST.ods
NAME:
MODEL:
DATE:
TOP:
join
rosette
open soundhole
brace
BACK:
join
center strip
brace
SIDES:
bend
bend binding
mold
BOX:
glue neckblock
make tailblock dado
glue tailblock
install end graft
struts
kerfing
radius back
glue back
radius top
glue top
BINDING:
shellac top edge
purfling channels
a) top
b) back
c)sides
binding channels
glue
NECK:
cut wood for lamination
a) install decorative wood
glue
cut heel stacks
cut headstock
cut truss rod channel
glue headstock
glue heel stacks
shape
veneer headstock
tuner holes
inlay headstock
FRETBOARD;
radius
level
slot
inlay
fret
glue to neck
PRESET NECK
glue heelcap
FINISH:
sand
inspect
fix notations from inspection
pore fill
inspect
fix notations from inspection
apply finish
inspect
fix notations from inspection
FINAL BUILD ELEMENTS:
set neck
make bridge
set bridge
slot bridge
level frets
dress frets
polish frets
inspect finish
fix notations from inspection
SETUP:
install tuners
make nut
make saddle
string
adjust action
INSPECT AND MAKE PUNCHLIST
address items on punchlist