www.KitGuitarsForum.com
http://www.kitguitarsforum.com/board/

Neck Set Story
http://www.kitguitarsforum.com/board/viewtopic.php?f=47&t=8317
Page 3 of 3

Author:  Kbore [ Tue Jan 09, 2018 11:44 pm ]
Post subject:  Re: Neck Set Story

And the last pic:

Author:  tippie53 [ Wed Jan 10, 2018 7:24 am ]
Post subject:  Re: Neck Set Story

Ok looks nice
I like to be 3/32 above but you should be fine.

Once strung up you want to be about 1/2 in off the top in front of the bridge the unknown is how much the top will rise. You are safe and the more you do this , the better you will get.

Author:  Diane Kauffmds [ Wed Jan 10, 2018 1:27 pm ]
Post subject:  Re: Neck Set Story

Looks good. You did a good job.

Author:  MaineGeezer [ Wed Jan 10, 2018 2:28 pm ]
Post subject:  Re: Neck Set Story

Nothing wrong with that!

Author:  ruby@magpage.com [ Wed Jan 10, 2018 3:17 pm ]
Post subject:  Re: Neck Set Story

John

Is that 3/32 over the bridge with the frets installed, or not?

Ed

Author:  Kbore [ Sat Sep 22, 2018 6:21 pm ]
Post subject:  Re: Neck Set Story

After starting over five times, the neck is set, and tighter than a tick on a hound dog. I can seat that neck with only my hands ( unfinished raw wood)and it's rock solid, perfectly aligned and takes a rubber mallet to get it loose. Wondering how the finish is going to affect it and how much monkeying around will be required after Nitro finish is applied? I'm now over a year into this first build : )

Author:  MaineGeezer [ Sat Sep 22, 2018 6:43 pm ]
Post subject:  Re: Neck Set Story

Splendid!

Author:  Diane Kauffmds [ Sat Sep 22, 2018 8:44 pm ]
Post subject:  Re: Neck Set Story

The finish is very thin. You won't have a problem.

Page 3 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/