Rookie kit builder in Atlanta area needs help

Questions and answers for beginners. If you have a question, so do most other people.
Post Reply
johnnparchem
Posts: 2354
Joined: Sat Apr 10, 2010 10:50 pm
Location: Seattle
Contact:

Re: Rookie kit builder in Atlanta area needs help

Post by johnnparchem »

The heel to body joint looks great! Put in a thin shim, fish glue wants to bond wood to wood. With your neck angles and the fit correct once fit you have a nice dove tail joint. Continue to rely on chalk as you fit the tenon. Think about how much dovetail practice to got on this guitar and all looks good.
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Rookie kit builder in Atlanta area needs help

Post by Diane Kauffmds »

It's looking good!
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
David Mathis
Posts: 27
Joined: Mon Sep 15, 2014 11:41 am
Location: Atlanta

Re: Rookie kit builder in Atlanta area needs help

Post by David Mathis »

Get ready for a sad story... And a question...

After I glued in shims (a third time) I began to have issues (again) with alignment and centering. And in adjusting those, had further problems with the gap between the neck heel and body. I had to hollow out around the cheeks again. I kept trying to no avail to get everything right again and have now reached the point where the dovetail tenon has bottomed out in the mortise. It seems the neck is just a mess after all my efforts. I am considering getting a new neck and starting over.

I found a good price on a StewMac dovetail neck. Would it be compatible with my Martin neck block?
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: Rookie kit builder in Atlanta area needs help

Post by Danl8 »

David Mathis wrote:Get ready for a sad story... And a question.......I found a good price on a StewMac dovetail neck. Would it be compatible with my Martin neck block?

Should be. Check with Blues Creek, too, for necks completely compatible with Martin blocks. My advice is to call John, who get you on the right track.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Rookie kit builder in Atlanta area needs help

Post by tippie53 »

no stew mac isn't
please call me I think I can help
what I think you did is mis matched your tenon angle to the mortise
you can still save this your just this close
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Rookie kit builder in Atlanta area needs help

Post by Diane Kauffmds »

John Hall can get you the appropriate neck blank. Hang in there.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Rookie kit builder in Atlanta area needs help

Post by tippie53 »

spoke with him we got a plan
I think we can salvage the neck he has
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
David Mathis
Posts: 27
Joined: Mon Sep 15, 2014 11:41 am
Location: Atlanta

Re: Rookie kit builder in Atlanta area needs help

Post by David Mathis »

Yes, it was John Hall to the rescue and he talked me through the issues I had – primarily the dovetail tenon angles being off. I went to work on it, but eventually the tenon was so mangled that I had to start over completely by chiseling off the mess of shims I had there and replacing them with one thick shim on each side.

So, believe it or not, I think I have the neck set. I feel like I've mostly built one guitar, but set 25 necks in the process. I have been struggling with this off and on since February of 2016. (I did take time away to build three electric guitars.)
You do not have the required permissions to view the files attached to this post.
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: Rookie kit builder in Atlanta area needs help

Post by Danl8 »

The next one will be easier. This one is looking good.
MaineGeezer
Posts: 1711
Joined: Wed Aug 13, 2014 12:14 pm

Re: Rookie kit builder in Atlanta area needs help

Post by MaineGeezer »

One good thing -- I doubt you will ever be intimidated by setting a neck again. You know what to do, and you know you can do it.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Post Reply