Plastic Binding
-
sammyjit
- Posts: 61
- Joined: Fri May 22, 2015 7:43 pm
Plastic Binding
I have glued the plastic binding. What is a good way to restore the nice shine to the plastic after sanding the wood flush to the plastic? I also have some small glue spots where the plastic melted a bit. Would using a large-to-small grit buffing technique work for this?
-
tippie53
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Plastic Binding
when you finish it , you will shine it back up. You need that rough look to give the finish something to bite on to
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com