Need help from pore o pac pros

[Alexie42]

Opened my quart can of oil based pore o pac only to find the oil sitting on top and the filler almost jellified. After much difficult stirring I was able to mix enough to do the first fill on my mahogany neck. My question is, how can I save my pore o pac. How can I return it to its original consistency? Or is that possible? Forgot to mention, bought from Amazon about two months ago.
Thanks,
William McDonald

[tippie53]

you can stir this when this sets for a while it will separate

[B. Howard]

Stir, stir , stir, it will come back.

[Alexie42]

Thanks guys, I was hoping that it was salvageable. Thanks again for your answers.

[MaineGeezer]

You might try one of the paint stirring paddles that goes in an electric drill. They work wonders on cans of paint. I don't know how one would work on something as thick as the filler, but it might be worth a cautious experiment.

[tippie53]

that mixer may be a tad large but something like that will do well.
Stir Stir Stir

[Alexie42]

Thanks John, I'll definitely give it a try. I'm not a big fan of hand stirring!

[MaineGeezer]

Just keep the rpm down until you find out how it's going to respond to the paddle.

[Alexie42]

John, your stirring attachment idea worked like magic! Slow speed stirring is the key. Thanks guys!