Page 1 of 1
Dimensions for tuner holes
Posted: Fri Jun 26, 2015 8:16 pm
by sammyjit
I have a martin neck for my kit guitar build. I don't have any scale drawings or dimensions for tuner holes. Anyone have any by chance or know where I can get the dimensions?
Thanks
Re: Dimensions for tuner holes
Posted: Fri Jun 26, 2015 9:34 pm
by tippie53
here you go
Re: Dimensions for tuner holes
Posted: Sat Jun 27, 2015 9:28 pm
by sammyjit
Thanks! I appreciate it.
Re: Dimensions for tuner holes
Posted: Sun Jun 28, 2015 4:18 am
by MaineGeezer
FWIW both LMI and StewMac websites provide dimensioned drawings for mounting the tuners they sell (hole spacing for screws, shaft hole size, etc.).
Re: Dimensions for tuner holes
Posted: Sun Jun 28, 2015 7:01 am
by tippie53
to note
not all tuners are the same. A waverley tuner and grover open back will interchange but many are slightly different.
here is a vid to this process
jh
https://www.youtube.com/watch?v=xwMuVg2DJEo