Using go bar deck to glue top and back
-
- Posts: 61
- Joined: Fri May 22, 2015 7:43 pm
Using go bar deck to glue top and back
I have a go bar deck I have been using from Blues Creek Guitars. Are those default gobars too long for gluing the top and back to the sides? Should I shorten the go bar rods? Or how many inch pounds of force is necessary?
-
- Posts: 7016
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Using go bar deck to glue top and back
Yes they are long. depending on what your making you need a variety of lengths.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 30
- Joined: Wed Jul 11, 2012 9:23 pm
- Location: Beloit, KS
Re: Using go bar deck to glue top and back
I tried this. The bars were bent over pretty good, but they were doing there job-or so I thought. When I came in the next day, they had all split in two and shed off sharp little fiberglass shards. So, I built spool clams and I'll need to order more bars before I do my next build. Live and learn-I should have known better.