Fellows,
Anyone have a PDF template for tuning machine placement on a Martin Kit that they may would share with me?
My back is somewhat against the wall here... My wife and I are expecting delivery of our daughter in mid-Feb, and working the day job for 23 of the last 25 days has slowed my progress. I have installed binding and purfling on the top, (roughed the channel to wide on the back and am awaiting bigger binding), the neck is set, (had to shim the sucker right out of the shoot), the neck is even finished with Tru Oil, the nut and saddle are made, the bridge placement is plotted, the fretboard trusrod and frets are installed… All that’s left is drilling for the tuners, gluing the neck, finishing and set-up. I have got to get this thing done before the old woman hatches!
Thanks!
Shawn
Martin Tuning Machine placement
-
- Posts: 5
- Joined: Mon Dec 02, 2013 11:14 am
-
- Posts: 7026
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Martin Tuning Machine placement
is this what you are looking for ?
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 5
- Joined: Mon Dec 02, 2013 11:14 am
Re: Martin Tuning Machine placement
Yes Sir! Thank you.