Removing Excess from Top & Back Prior to Routing for Binding

Questions and answers for beginners. If you have a question, so do most other people.
Post Reply
DavisLee
Posts: 44
Joined: Sat Dec 29, 2012 8:09 am

Re: Removing Excess from Top & Back Prior to Routing for Bin

Post by DavisLee »

Beautiful, nicely done, and entertaining to boot.
Top
tippie53
Posts: 7019
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:
Contact tippie53

Re: Removing Excess from Top & Back Prior to Routing for Bin

Post by tippie53 »

I can tell you that using a router table , he did have some tear out , you can see and hear it. Most tearout will be covered by the binding and perfling. I do use a router with a flush bit , then I can climb or rout cut the areas of concern.
check at about 12 to 13 .

Mario is a character
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Top
Post Reply

Return to “Beginners' Questions”