Hey folks - I thought I would start to post here instead of bugging John Hall directly (give him a break)!!
I glued on the fretboard yesterday with titebond. ebony board on mahogany neck. I had more squeeze out than I could control or clean up prior to drying (prob a rookie mistake). Any best practices on removing the dried squeeze out titebond? Is my only option scraping and sandpaper? thanks All!
dried titebond squeeze out - removal help
-
- Posts: 3
- Joined: Wed Nov 22, 2017 10:18 am
-
- Posts: 7026
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: dried titebond squeeze out - removal help
if it is raw wood scrape and sand
Next time wait about 10 min and the glue will come off like a good booger
Next time wait about 10 min and the glue will come off like a good booger
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com