www.KitGuitarsForum.com
http://www.kitguitarsforum.com/board/

Nifty Little Sander!
http://www.kitguitarsforum.com/board/viewtopic.php?f=4&t=8737
Page 2 of 3

Author:  jread [ Thu Aug 22, 2019 1:12 pm ]
Post subject:  Re: Nifty Little Sander!

Yep, Ran out when you posted it and got the sale so thanks! This end graft was done in seconds. Been needing something like this. I haven't tried swapping the sticky paper but imagine it will be fine.

Author:  Diane Kauffmds [ Thu Aug 22, 2019 1:25 pm ]
Post subject:  Re: Nifty Little Sander!

jread wrote:
Yep, Ran out when you posted it and got the sale so thanks! This end graft was done in seconds. Been needing something like this. I haven't tried swapping the sticky paper but imagine it will be fine.

I'm glad you found it useful.

Author:  Bob Gleason [ Sun Aug 25, 2019 1:56 pm ]
Post subject:  Re: Nifty Little Sander!

Diane- What was the approximate physical size of the box this sander came in? A friend ordered one. USPS says it was delivered to his mailbox last week, but he did not get it. Trying to get info to go back to USPS with. Thanks, Bob

Author:  jread [ Mon Aug 26, 2019 10:23 am ]
Post subject:  Re: Nifty Little Sander!

Bob Gleason wrote:
Diane- What was the approximate physical size of the box this sander came in? A friend ordered one. USPS says it was delivered to his mailbox last week, but he did not get it. Trying to get info to go back to USPS with. Thanks, Bob


The sander's box I bought in store last week was about 12" x 8" x 8". Not sure if shipping would have put that box into a bigger box tho.

Author:  Bob Gleason [ Mon Aug 26, 2019 12:08 pm ]
Post subject:  Re: Nifty Little Sander!

Thanks jread.--Bob

Author:  Diane Kauffmds [ Mon Aug 26, 2019 2:58 pm ]
Post subject:  Re: Nifty Little Sander!

Bob Gleason wrote:
Diane- What was the approximate physical size of the box this sander came in? A friend ordered one. USPS says it was delivered to his mailbox last week, but he did not get it. Trying to get info to go back to USPS with. Thanks, Bob


The box is 11 long x 9" wide x 7.5" high. But, I think it was in another box that I've since thrown out. He'd have to have a large mailbox for it to fit. I have an old fashioned rural mailbox, and it won't fit in it.

Author:  Bob Gleason [ Sun Sep 08, 2019 4:25 am ]
Post subject:  Re: Nifty Little Sander!

After seeing the sander on this site, I told a friend who bought one. I ended up getting 1 too. Certainly could have lived without it, but at $35.00 it was a deal. I have a 12" disc and a 6" disc on other tools, but this little 5" one is pretty cool. Very quiet, smooth, and easily moved right to the work bench for projects.Great to have right at the bench for working with pearl purfling for one. Only drawback is that I only have whole shop dust collection, so hard to collect the dust from it. Can't handle the noise from those cheap portable vacuums, and the good Fein ones are pricey.

Author:  Diane Kauffmds [ Sun Sep 08, 2019 2:28 pm ]
Post subject:  Re: Nifty Little Sander!

The dust collection could certainly be better. It's something I'm going to take a close look at for modification. I use a small shopvac and I wear a mask when in use.

I've found it useful for all sorts of things. It will handle the hard stuff, like ebony. I just let the grit do the work. It's my go to sander. I have it mounted on my favorite workbenche, right across from where I do the majority of my work.

Author:  Bob Gleason [ Wed Sep 25, 2019 6:34 pm ]
Post subject:  Re: Nifty Little Sander!

Just saying how much I like this little sander the more I use it. Really great for pearl work. No need to get up and walk to the sander anymore.

Author:  jread [ Thu Sep 26, 2019 9:54 am ]
Post subject:  Re: Nifty Little Sander!

Started using it for pearl last night. Nice score, Diane. right on the bench next to my project and saw station. Just starting a bigger project and this surely speeds things up.

Page 2 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/